Journal Paper

1. "The effect of multi‑pass welding on residual stresses in fillet welded built‑up steel box sections"
   nima tajik, Saba Marmarchinia, Alireza Mahmoudian, Asghari Abazar, Seyed Rasoul Mir Ghaderi
   Asian Journal of Civil Engineering, Vol. -, 2024
2. "Lateral-torsional buckling investigation of multi-tiers eccentrically braced frames with shear link beam"
   Mohammad Rezaee, Asghari Abazar
   STRUCTURES, Vol. 68, 2024
3. "Seismic Behavior Assessment of Special Concentrically X‑braced Frame with Through Gusset Plate"
   Asghari Abazar, Sohrab Hosseini
   Iranian Journal of Science and Technology-Transactions of Civil Engineering, Vol. -, 2024
4. "Self-centering of steel braced frames equipped with Fe-SMA TADAS dampers"
   Amir reza torabi zade, Alireza Foyouzat, Asghari Abazar, Soheil Mohammadi Tochaei
   Smart Materials and Structures, Vol. 33, No 6, 2024
5. "A new performance-based seismic design method using endurance time analysis for linked column frame system and a comparison of structural systems and seismic analysis methods"
   Vahid Jaberi, Masume Jaberi, Asghari Abazar
   THE STRUCTURAL DESIGN OF TALL AND SPECIAL BUILDINGS, Vol. -, 2024
6. "Experimental and numerical study on weld strengths of built-up steel box columns"
   nima tajik, Seyed Rasoul Mir Ghaderi, Asghari Abazar, mohammad javad hamidia
   JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, Vol. 213, 2024
7. "Seismic behavior of linked column system as a steel lateral force resisting system"
   vahid jaberi, Asghari Abazar
   JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, Vol. 196, No 107428, 2022
8. "Shear strength and stiffness enhancement of cross-stiffened steel plate shear walls"
   mohammad jalilzadeh afshari, Asghari Abazar, mahid gholhaki
   International Journal of Advanced Structural Engineering, Vol. 11, No 11, pp.179-193, 2019
9. "Seismic design and performance evaluation of steel frames with knee-element connections"
   Asghari Abazar, saeid saharkhizan
   JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, Vol. 154, No 154, pp.161-176, 2019
10. "A New Study of Seismic Behavior of Perforated Coupled Shear Walls"
    Asghari Abazar, behnam azimi
    International Journal of Civil Engineering, Vol. 15, No 1, pp.1-15, 2017
11. "Evaluation of sensitivity of CBFs for types of bracing and story numbers"
    Asghari Abazar, behnam azimi
    Scientia Iranica, Vol. 24, No 1, pp.40-52, 2017
12. "New design equations for elastic modulus of concrete using multi expression programming"
    Amir Hossein Gandomi, ali faramarzifar, Peyman GHANAD REZAEE, Asghari Abazar, siamak talatahari
    JOURNAL OF CIVIL ENGINEERING AND MANAGEMENT, Vol. 21, No 6, 2015
13. "Evaluation Of Effect Of Back Stay Effect On The Design Of Coupling Shear Walls"
    Asghari Abazar, behnam azimi
    Canadian Journal of Basic and Applied Sciences, Vol. -, 2015
14. "Ductility reduction factor and collapse mechanism evaluation of a new steel knee braced frame"
    Asghari Abazar, amir gandomi
    Structure and Infrastructure Engineering, Vol. 12, No 2, pp.239-255, 2015
15. "An innovative approach for modeling of hysteretic energy demand in steel moment resisting frames"
    amir hossein gandomi, amir hossein alavi, Asghari Abazar, hadi niroomand, ali matin nazar
    International Journal of Innovative Computing and Applications, Vol. 24, No 24, 2013
16. "Effect of perforation on the hysteretic response of coupling shear walls"
    Asghari Abazar, behnam azimi, amir hossein gandomi
    International Journal of Earthquake Engineering and Hazard Mitigation, Vol. 1, No 1, pp.72-77, 2013
17. "A robust predictive model for base shear of steel frame structures using a hybrid genetic programming and simulated annealing method"
    pejman aminian, Mohamad Reza Javid, Asghari Abazar, Amir Hossein Gandomi, Milad Arab Esmaeili
    International Journal of Innovative Computing and Applications, Vol. 20, No 20, 2011
18. "Evaluation of the effect of force extension on the ultimate strength of longitudinal and transverse corner welds in the connection of cover sheets with high-strength steel"
    Asghari Abazar, محمدرضا علیمردانی, حامد پاشائی
    سازه و فولاد, Vol. 18, No 43, 2024
19. "Quantification of the seismic parameters of building frame systems with linked columns"
    Asghari Abazar, وحید جابری
    سازه و فولاد, Vol. 17, No 40, 2023
20. "Seismic improvement of existing buildings using the system of connected columns"
    وحید جابری, Asghari Abazar
    Sharif Journal Civil Engineering, Vol. 36-2, pp.55-65, 2020
21. "Investigating the idea of simple frame with connected columns as a steel structural system"
    Asghari Abazar, وحید جابری
    سازه و فولاد, Vol. 20, No 27, 2020
22. "Evaluation of seismic performance of simple frame system with connected columns"
    وحید جابری, Asghari Abazar
    Civil engineering Modarres, Vol. 19, No 6, 2019
23. "Evaluation of the ductility reduction factor of convergent braces and as shown in Figure 8"
    Asghari Abazar
    Structural Engineering, Vol. 6, No 2, pp.175-190, 2019
24. "Investigating the cyclic behavior and evaluating the performance of the frame with elbow connection finite element analysis tool"
    Asghari Abazar, سعید سحرخیزان
    Sharif Journal Civil Engineering, Vol. 34-2, No 2, pp.67-78, 2018
25. "Seismic Evaluation of Rocking Steel Braced System with CFRP Post-Tensioned Cables"
    حسن امیرذهنی, Asghari Abazar, عرفان شافعی
    Civil engineering Modarres, Vol. 17, No 4, 2017
26. "Evaluating the ductility of the cross braces located in the two openings at the beginning and end of simple building frames"
    Asghari Abazar
    Amirkabir Journal of Civil Engineering, Vol. 49, No 2, pp.213-225, 2017
27. "Investigating the seismic behavior of the centrifugally divergent bracing frame with fuses distributed in height"
    Asghari Abazar, سیاوش قناعت پیشه
    سازه و فولاد, Vol. 10, No 20, 2017
28. "Studying the vibration behavior of steel bracing frames with the performance of cradles equipped with energy depletion fuses"
    حسن امیرذهنی, Asghari Abazar, عرفان شافعی
    Structural Engineering, Vol. 3, No 3, pp.73-85, 2016
29. "Calculating the error caused by segmentation using the method of gradient recovery law and adaptive correction of elements"
    Asghari Abazar
    Amirkabir Journal of Civil Engineering, Vol. 48, No 2, pp.169-179, 2016
30. "Evaluation of the plasticity reduction factor of 7 and 8 combined braces"
    Asghari Abazar
    Sharif Journal Civil Engineering, Vol. 2-32, pp.101-110, 2016
31. "Seismic design of building frames combined with convergent bracing by creating temperature changes in bracing members"
    Asghari Abazar, حمید اسدی
    Sharif Journal Civil Engineering, Vol. 2-32, pp.109-118, 2016
32. "Ductility Evaluation of X-Braced Steel Frames which are Braced in Two Adjacent Middle Bayes"
    Asghari Abazar
    Ferdowsi university civil engineering, Vol. 27, No 2, pp.57-74, 2016

Conference Paper

1. "Innovative Self-Centering Controlled Rocking Eccentrically Braced Frames"
   siavash Ghanaatpisheh, Asghari Abazar
   2nd international conference of engineering & applied science, 2016
2. "Study of Moment Resistant Knee Braced Frames as an Alternative for Moment Resisting Frames with Rigid Connections"
   Asghari Abazar, Seyed Rasoul Mir Ghaderi
   Eleventh World Conference on Earthquake Engineering, 1996
3. "Evaluation of the seismic behavior of multi tiered bracing frame"
   Asghari Abazar, Mohamad Rezayi
   12th conference on steel & structure, 2023
4. "Numerical evaluation of the ultimate strength of transverse corner welds and its comparison with the strength of longitudinal corner welds in the connection of cover sheets"
   Asghari Abazar, محمدرضا علیمردانی, حامد پاشائی
   12th conference on steel & structure, 2023
5. "Investigating the seismic behavior of column bottoms under the effect of compressive axial load and biaxial bending anchors"
   Asghari Abazar, ali zeinali
   8th.International Congress on Civil Engineering , Architecture and Urban Development, 2023
6. "The effect of using stiffeners and vertical cover plates in cross sections. National Architecture Conference"
   Asghari Abazar, سینا سکاکی
   National Conference on Architecture, Civil Engineering, Urban Development and Horizons of Islamic Art in the Second Step Statement of the Revolution, 2020
7. "Comparison of the performance of steel columns of different sections under concentrated lateral load"
   Asghari Abazar, سینا سکاکی
   12th National Congress of Civil Engineering, 2020
8. "Comparison of seismic performance of special flexural frame system with special convergent braced frame system"
   وحید جابری, Asghari Abazar, معصومه جابری
   10 th National Conference On Steel & Straucture, 2019
9. "Evaluation of the effects of perforated shear fuses on the behavior of special bending frames"
   سالار خورشیدی, Asghari Abazar
   9th National Conference and 3rd International Conference on Structure and Steel, 2018
10. "Investigating the idea of a simple frame system with connected columns as a new steel structure system"
    وحید جابری, Asghari Abazar
    9th National Conference and 3rd International Conference on Structure and Steel, 2018
11. "Investigating the effect of slotted yielding dampers and improving their performance in steel bending joints"
    سالار خورشیدی, Asghari Abazar, حمیرضا اشرفی
    Conference on Civil Engineering, Architecture and Urban Planning of the Islamic World of Iran - Tabriz (the tourism capital of Islamic countries) 2011, 2018
12. "Investigating the seismic behavior of a centrifugally divergent bracing frame with fuses distributed in height"
    Asghari Abazar, سیاوش قناعت پیشه
    The 7th National Conference and the 2nd International Conference on Structures and Steel, 2017
13. "Investigating the sensitivity of centripetal converging bracing systems to the height position of retracted cables"
    Asghari Abazar, سیاوش قناعت پیشه
    4th. International Congress on Civil Engineering , Architecture and Urban Development, 2016
14. "Investigation of behavior and seismic evaluation of high-rise buildings with lattice structural system"
    هادی جعفری, Asghari Abazar, عرفان شافعی
    International Conference on Civil Engineering, 2016
15. "Presenting the behavioral model of the axial plastic joint for the elbow element in frames with elbow joints"
    سعید سحرخیزان, Asghari Abazar
    2st National Conference on Iranian Structural Engineering, 2016
16. "Seismic design of knee braced steel frame without diagonal element and evaluation of behavioral parameters of this system"
    Asghari Abazar, سعید سحرخیزان, امین قلیزاد
    6th Conference on Steel & Structure, 2015
17. "Finite element analysis of the connection with the knee joint in the braced knee frame without diagonal element as an alternative to the braced connection of the bending frame"
    Asghari Abazar, امین قلیزاد, سعید سحرخیزان
    4nd National Conference on New Material and Structures in Civil Engineering, 2015
18. "Investigating the hysteresis behavior of free wing connection and WUF-W connection and comparing them with conventional connection"
    Asghari Abazar, سمیه شکری, احسان احمدی شیروانی
    8th National Congress On Civil Engineering, 2014
19. "Introducing an effective strategy for the analysis and design of braced frames to provide the expected ductility"
    Asghari Abazar, مهران سلطانی نژاد, علی رهبر, حمید اسدی
    5th National Conference on Earthquake and Structural, 2014
20. "The effect of increasing the beam thickness on the strength and ductility of conventional free wing and WUF-W connections"
    Asghari Abazar, سمیه شکری
    5th National Conference on Earthquake and Structural, 2014
21. "Improving the seismic performance of special steel bracing frames by complying with the criteria in AISC341-2012"
    Asghari Abazar, حمید اسدی
    7th National Congress on Civil Engineering, 2013
22. "Investigating the effect of the position of the braces on the performance of the diaphragm"
    Asghari Abazar, علیرضا صادقی
    7th National Congress on Civil Engineering, 2013
23. "Comparison of the behavior of conventional clamped connection with the behavior of non-reinforced welded wing connection and free wing connection"
    Asghari Abazar, سمیه شکری
    7th National Congress on Civil Engineering, 2013
24. "Providing an effective and simple method for the analysis and design of cross braced frames using thermal loading"
    Asghari Abazar, حمید اسدی
    7th National Congress on Civil Engineering, 2013
25. "Investigating the effect of the arrangement and number of bracing openings of double steel systems on the UPLIFT force generated in the supports"
    Asghari Abazar, علیرضا صادقی
    7th National Congress on Civil Engineering, 2013
26. "Comparison of the distribution method of plastic joint in conventional joint with free wing joints and WUF-W"
    Asghari Abazar, سمیه شکری
    Fourth National Conference on Earthquake and Structural, 2013
27. "Philosophical approach to the design of steel structures using load and resistance factor method (LRFD) and its comparison with allowable stress method (ASD)"
    Asghari Abazar, شاهرخ شعیبی, علیرضا صادقی
    3rd Conference of Steel and Structures, 2012
28. "Comparison of conventional arrester connection behavior (OMC) with free wing arrester connection behavior (FFC)"
    Asghari Abazar, سمیه شکری
    Third National Conference on Earthquakes and Structures, 2012
29. "Investigating the effect of the number of bracing openings on double steel systems"
    Asghari Abazar, علیرضا صادقی
    Third National Conference on Earthquakes and Structures, 2012
30. "Investigating the behavior and seismic performance of diaphragms in structural systems"
    Asghari Abazar, شاهرخ شعیبی
    Iranian Association of Construction Accountant Engineers, 2012